Fit to Flow: Installing Fittings on Your Pro Vision System
In this quick how-to video, we’ll show you the simple steps to install fittings on your Pro Vision or Nature2 chlorinator. Whether you’re setting up your system for the first time or replacing parts, this guide ensures a tight, leak-free connection every time.
Key Takeaways:
Always apply Teflon tape in the correct direction for a secure seal.
Proper thread alignment prevents leaks and equipment damage.
Hand-tightening the fittings clockwise is typically sufficient when properly sealed.
Step-by-Step Process:
Begin by applying Teflon tape to the threads, wrapping counterclockwise with the threads facing away from you.
Insert the fittings into the inlet and outlet openings.
Turn the fittings clockwise until tight.
Inspect for proper seal and alignment.
Resources and Explanations:
Teflon Tape – Creates a watertight seal between fittings.
Pro Vision/Nature2 Chlorinator – A common mineral sanitizer system for pools.
Hand-tight Method – In most cases, you won’t need tools; overtightening can damage threads.
Visual Guide – Watch the video for correct taping direction and thread orientation.
FAQs:
Q1: Do I need tools to tighten the fittings?
A: Usually no—hand-tightening with Teflon tape is enough for a good seal.
Q2: What happens if I wrap the tape the wrong way?
A: The tape can unravel during tightening, which could cause leaks.
Q3: How much Teflon tape should I use?
A: 2–3 wraps is typically sufficient to ensure a secure seal.
Need help with more pool care essentials? Contact your local Great Escape pool expert—we’re always happy to help you get the most out of your pool!
Comments