How to Replace a Hayward Full Return Assembly: Step-by-Step Guide
This guide walks you through the process of replacing a Hayward full return assembly. Whether you're dealing with wear and tear or upgrading your pool components, this guide will help you get the job done with ease.
Key Takeaways:
The return assembly replacement process requires lowering your water level and safely removing the old components.
Using the proper tools, like the seat removal tool, ensures you can remove tight fittings without damage.
Installing the new return assembly requires attention to gasket placement to avoid leaks and ensure a secure fit.
Step-by-Step Process:
Start by lowering the water below the return jet to avoid water spillage during replacement.
Turn the lockring and eyeball counterclockwise to detach them. Remove the eyeball assembly.
If the fitting is tight, use the seat removal tool. Insert the key into the grooves and turn counterclockwise.
Secure the return fitting from inside the pool, then turn the outside lock nut counterclockwise to loosen. Remove the old return and gaskets carefully.
Place the first, new rubber gasket over the threads and push the return fitting through the cutout inside the pool. Install the second rubber gasket followed by the cork gasket on the outside of the pool and tighten the lock nut.
Attach the new inner fitting by turning clockwise. Insert the eyeball and loosely secure the lock ring, adjusting the eyeball’s position before fully tightening.
Resources and Explanations:
Seat Removal Tool: A specialized tool used to loosen tightly secured fittings in the return assembly.
Lock Nut: A component that holds the return assembly securely against the pool wall and liner.
FAQs:
Q1: Why do I need to lower the water level below the return jet?
A: Lowering the water level prevents water from spilling out and allows you to work comfortably on the return assembly.
Q2: What if I can't remove the inner fitting by hand?
A: Use the seat removal tool to safely remove the fitting without damaging it.
Q3: Why is the gasket placement important?
A: Proper gasket placement prevents leaks and ensures a secure, watertight seal between the return and the pool wall.
Q4: Can I use standard tools to loosen the lock nut?
A: Channel locks or a wrench can be used to loosen the lock nut but be careful not to over-tighten or damage the components.
Q5: What should I do if the eyeball changes position while tightening the lock ring?
A: Recheck the eyeball position after tightening and adjust if necessary, ensuring the flow is directed as needed.
With your Hayward return assembly now replaced, your pool is ready for action! The Great Escape is here to support your pool maintenance journey. If you have any questions or need further assistance, don't hesitate to contact your local team—we’re happy to help!
Comments