Lock It Down: Swapping Tabs on Your Hayward Voyager
Got a loose filter lid or worn-out locking tabs? In this quick tutorial, we’ll walk you through the simple steps to replace the locking tabs on your Hayward Voyager cartridge filter—keeping your system sealed and secure for smooth pool operation.
Key Takeaways:
Replacing locking tabs prevents leaks and ensures a tight seal.
This simple repair requires only a flathead screwdriver.
Shutting off water flow and releasing pressure is essential before disassembly.
Step-by-Step Process:
Stop water flow using shut-off valves or black plugs in the skimmer and return.
Open the air relief valve to release pressure.
Loosen the black ring by holding the tabs and turning it counterclockwise.
Unscrew the drain plug and fully drain the tank.
Remove the black ring and pop out the old locking tabs.
Snap new tabs into place, align and press gently.
Reassemble the tank lid and tighten the ring by hand.
Resources and Explanations:
Locking Tabs – Help secure the filter lid for proper operation.
Hayward Black Plugs – Used to block water flow manually during repairs.
Flathead Screwdriver – The only tool required to remove and install tabs.
Drain Plug – Allows safe draining of the filter tank during maintenance.
FAQs:
Q1: Do I need to turn off the pump before starting?
A: Yes, always shut off the pump before performing any maintenance.
Q2: Can I reuse old locking tabs?
A: No, worn or damaged tabs should be replaced to maintain a tight seal.
Q3: What if I don’t have shut-off valves?
A: Use Hayward black plugs in the skimmer and return to block water manually.
Reach out to your local Great Escape team if you need any extra help. We’re always happy to help!
Comments