Seal, Tighten, Bond: Installing Your Copper Bonding Kit for Your Pool Pump
Properly installing your bonding kit starts with creating a secure connection at the pool pump and correctly positioning the copper fitting for the bonding wire. In this tutorial, we'll show you how to prepare the copper nut for the bonding wire connection.
Key Takeaways:
Wrap the fitting threads with Teflon tape before installation to help create a watertight seal and reduce the chance of leaks.
Position the copper fitting downward as you tighten it into the pump so the bonding wire can be properly connected.
Once the fitting is installed, the copper bonding wire should be attached according to your local building codes.
Step-by-Step Process:
Wrap the threads of the fitting with Teflon tape to help create a watertight seal.
Thread the fitting into the pump by turning it clockwise.
As you tighten the fitting, position the copper fitting so it faces downward.
Check the installed fitting for leaks.
If you notice a leak, use channel lock pliers to carefully tighten the fitting a little more.
Avoid over tightening, which could damage the fitting or the pump threads.
Once the fitting is securely installed, attach the copper bonding wire according to your local building codes.
Your bonding kit is now installed and ready for use.
Resources & Explanations:
Bonding Kit with Copper Nut — Provides the fitting used at the pump and the connection point for the copper bonding wire.
Teflon Tape — Wraps around the fitting threads to help create a watertight connection and reduce the chance of leaks.
Channel Lock Pliers — Can be used to carefully tighten the fitting further if you notice a leak after installation.
Copper Bonding Wire — Connects to the installed copper fitting according to applicable local building codes.
FAQs:
Q1: Why should I use Teflon tape on the fitting?
A: Teflon tape helps create a watertight seal around the threaded connection and reduces the chance of leaks.
Q2: Which direction should the copper fitting face?
A: Position the copper fitting so it faces downward. This allows the bonding wire to be properly connected after installation.
Q3: What should I do if the fitting leaks?
A: Use a pair of channel lock pliers to carefully tighten the fitting a little more. Avoid over tightening, as this could damage either the fitting or the pump threads.
Careful installation helps create a secure connection and prepares your bonding kit for the required bonding wire. For bonding wire requirements, always follow your local building codes.
If you have questions about your bonding kit or pool equipment, contact your local Great Escape team. We’re always happy to help!
Comments