Clean, Clear & Store: Keep Your Inferno Pool Cleaner Ready for the Season

Your Inferno Automatic Pool Cleaner needs attention in a few different areas to keep it operating at peak performance. In this tutorial, The Great Escape walks you through cleaning the basket, checking the impeller, and properly storing the cleaner when it will be out of use for an extended period.

Key Takeaways:

• The filter basket should be removed, emptied, and thoroughly rinsed.

• Proper basket alignment matters during reassembly.

• Protect the power supply with its cap.

• The Inferno cleaner should be stored indoors in a clean, dry location.

https://youtu.be/3Ih3HCK70kM

Step-by-Step Process:

CLEAN THE FILTER BASKET

1. Access the filter basket from the top of the Inferno.

2. Place your hands on the handle and push forward with your thumbs to unlock the basket.

3. Lift the basket out using the handles on each side.

4. Pull the tab at the front of the basket to open the lid.

5. Empty any leaves, dirt, or other debris collected inside.

6. Rinse the basket thoroughly with a garden hose to remove anything that remains.

REINSTALL THE BASKET CORRECTLY

1. Place the clean filter basket back into the pool robot.

2. Check that the basket is properly aligned before trying to close the cleaner.

3. Press the handles down until the basket locks securely into position.

4. If the cleaner’s cover does not close properly, recheck the basket alignment before continuing.

CHECK THE IMPELLER

1. Use a flathead screwdriver to remove the protective grill covering the impeller.

2. Inspect the impeller area for leaves, hair, or other trapped debris.

3. Remove any obstructions you find.

4. Reinstall the protective grill once the area is clear.

PREPARE FOR EXTENDED STORAGE

1. If the Inferno will not be used for an extended period, screw the protective cap back onto the power supply.

2. Store the pool robot indoors in a clean, dry location until it is ready to be used again.

Resources & Explanations:

• Filter Basket — Collects leaves, dirt, and debris during cleaning.

• Garden Hose — Rinses remaining debris from the basket after emptying.

• Flathead Screwdriver — Removes the protective grill for impeller access.

• Protective Power Supply Cap — Covers the connection during extended storage.

FAQs:

Q1: What should I check if the Inferno cover won’t close?

A: Check the filter basket alignment. If the basket isn’t properly seated, the cover will not close correctly.

Q2: Should I rinse the filter basket after emptying it?

A: Yes. After removing the larger debris, rinse the basket thoroughly with a garden hose to clear out anything that remains.

Q3: Why should I inspect the impeller?

A: Leaves, hair, and other debris can become trapped inside the impeller area where they may not be visible from the filter basket.

Q4: What tool do I need to access the impeller?

A: Use a flathead screwdriver to remove the protective grill, then reinstall the grill after clearing any obstructions.

Q5: How should I store the Inferno when I won’t be using it for a while?

A: Replace the protective cap on the power supply and store the robot indoors in a clean, dry location.

Taking a little extra care with reassembly and long-term storage helps keep your Inferno cleaner ready for the work ahead. At The Great Escape, we’re here to help you understand and care for your pool equipment so you can get more from it season after season. If you have questions about your Inferno Automatic Pool Cleaner, contact your local Great Escape team. We’re always happy to help!