Power Up & Dive In: Charging Your Sprinter Pool Cleaner
Before your Sprinter Automatic Pool Cleaner can begin its first cleaning cycle, the battery needs to be fully charged and the charging connection properly secured. In this tutorial, The Great Escape shows you how to connect the charger, read the indicator light, and protect the charging port once the battery is ready.
Key Takeaways:
The charging port is located on top of the Sprinter near the handle and is protected by a screw-on cap.
Proper alignment matters when connecting the charger—the notch and slot should line up before insertion.
The charger light gives you a clear status update: red means the battery is charging, while green means the charge is complete.
Step-by-Step Process:
Plug the charging adapter into a power source.
Locate the charging port on top of the Sprinter near the handle.
Unscrew the protective cap to expose the charging connection.
Align the notch and slot on the charger and charging port.
Plug the charger into the robot.
Check the indicator light on the charger. A red light confirms that the battery is charging.
Allow the battery to charge completely.
When the indicator light changes from red to green, disconnect the charger.
Securely tighten the protective cap over the charging port.
Your Sprinter Automatic Pool Cleaner is now fully charged and ready for its first cleaning cycle.
Resources & Explanations:
Charging Adapter — Supplies power to the Sprinter battery before use.
Charging Port — Located near the handle and covered by a protective cap when not in use.
Alignment Notch & Slot — Help ensure the charger is connected in the proper position.
Indicator Light — Provides a simple visual charging status, changing from red during charging to green when complete.
FAQs:
Q1: How do I know the Sprinter is actually charging?
A: Once the charger is properly connected, the indicator light will illuminate red. That confirms the battery is charging.
Q2: How do I know when the battery is fully charged?
A: Wait until the charger’s indicator light changes from red to green. At that point, the charger can be disconnected.
Q3: Why should I replace the protective cap after charging?
A: The cap helps keep the charging port clean and protected when the charger is disconnected. Tighten it securely before using or storing the cleaner.
A properly charged battery gets your Sprinter ready to complete its first cleaning cycle without interruption. If you have questions about charging or operating your Sprinter Automatic Pool Cleaner, contact your local Great Escape team. We’re always happy to help!
Comments